SikaLastomer 710 Sealant 310ml - White SK1344

SikaLastomer-710 Sealant 310ml - White  Butyl Sealant SikaLastomer-710 is a butyl based pasty and non-sagging sealant which contains solvents. The curing takes place by physical drying. This product can be used for the plastic sealing of joints in many industrial sectors.   Easy to apply Good adhesive spectrum Good ageing resistance Important Notice: Please note that the images of the product shown above are for illustrative purposes only. While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer. We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product. If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270. At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you. Thank you for choosing Batteries and Solar for your purchase. Key Features PRODUCT BENEFITS Easy to apply Good adhesive spectrum Good ageing resistance Plastic behaviour Cures without heat Later disassembly possible   Usage SikaLastomer-710 is particularly suitable for plastic seals that can be easily disassembled. It is used in the car, bus, truck and caravan industry. SikaLastomer-710 shows good adhesion with minimal surface preparation on almost every common substrate used in the above-mentioned fields. This product is suitable for experienced professional users only. Tests under actual processing conditions and with additional materials such as fibers and release agents must be performed to proof material compatibility.   Surface Preparation Surfaces must be clean, free from dust, grease, oil and water. If adhesion is crucial it has to be verified by tests on original substrates. Application Apply the sealant into the joint with a suitable manual or compressed-air gun, taking care to avoid air entrapment. Do not apply at temperatures below 10 °C or above 35 °C. Tooling and finishing Joints made with SikaLastomer-710 are easily tooled with water and soap. Removal On non-porous surfaces let sealant dry and remove by dabbing. On porous surfaces cured SikaLastomer-710 can only be removed mechanically.   Hands and exposed skin have to be washed immediately using hand wipes such as Sika Cleaner-350H or a suitable industrial hand cleaner and water. Do not use solvents on skin. Overpainting SikaLastomer-710 can only be overpainted with some water based systems. The paint must be tested for compatibility by carrying out preliminary trials. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area. Specifications Chemical base Butyl Colour (CQP001-1) White, grey, black Density (uncured) 1.4 kg/l Application temperature 10 €“ 35C Skin time (CQP019-1) 10 €“ 20 minutes A     Shrinkage (CQP014-1) 12% Service temperature (CQP513-3) -30 €“ 80C Shelf life 15 months B     CQP = Corporate Quality Procedure A) 23C / 50% r. h. B) stored (unopened) in a dry place between 5C and 30C. Protect from direct sunlight. Attachments Data Sheet