Victron Energy Smart BatteryProtect 48V-100A BPR110048000

Victron Energy Smart BatteryProtect 48V-100A BPR110048000

The Victron Smart BatteryProtect 48V-100A is designed to protect your battery by disconnecting non-essential loads before excessive discharge occurs, preventing damage and extending battery life. It features Bluetooth connectivity, allowing for easy configuration and monitoring via the VictronConnect app, making it an essential tool for battery management in off-grid, marine, automotive, and industrial applications.

£ 127.68 127.68 GBP £ 127.68 VAT Included

£ 106.40 VAT Included

This combination does not exist.

Add to cart

Found it cheaper? We offer a Nationwide Price Promise on all products.

Terms and Conditions

Internal Reference: 105672

The Smart BatteryProtect 48V 100A disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.

Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.

If required, Bluetooth can be disabled.

The Smart BatteryProtect 48V 100A is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

IMPORTANT NOTICE:

Please note that the images of the product shown above are for illustrative purposes only.

While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.

We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.

If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.

At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.

Thank you for choosing Batteries and Solar for your purchase.

Features of the Battery Protect 48V 100A

Protects the battery against excessive discharge and can be used as a system on/off switch

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

The on/off input can be used as a system on/off switch.

Bluetooth: programming made easy

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.

Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.

If required, Bluetooth can be disabled.

Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V.

Ignition proof

No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds.

Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

A special setting for Li-ion batteries

In this mode the Smart BatteryProtect 48V 100A can be controlled by the VE.Bus BMS.

Ultra-low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown.

Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.

The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Monitor, operate & control your system

Use the VictronConnect app to configure, monitor, update and diagnose your Smart BatteryProtect. It can connect to Victron products via Bluetooth, USB and WiFi/LAN/Internet.

Brand	Victron Energy
Manufacturer Part Number	BPR110048000
GTIN	8719076041252
Voltage	48V
Max. Continuous Load Current	100A
Peak Current (During 30 Seconds)	250A
Operating Voltage Range	24 – 70 V
Alarm Output Delay	12 seconds
Max. Load on Alarm Output	50mA
Load Disconnect Delay	90 seconds
Protection Category	Electronics: IP67 (potted), Connections: IP00
Connection	M8
Mounting Torque	9 Nm
Bluetooth Enabled	Yes
Dimensions	H62 x W123 x D120mm
Weight	0.8Kg
Warranty	5 Years
Country of Manufacture	India

Data Sheet

Product Manual