Blue Smart IP22 Charger 12/15(1) 230V AU/NZ
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Important Notice:
Please note that the images of the product shown above are for illustrative purposes only.
While we strive to provide accurate representations, there might be slight differences between the product image and the actual product you receive. These variations could be due to lighting, individual screen settings, product enhancements, or minor design updates from the manufacturer.
We assure you that any discrepancies are minimal and will not affect the overall quality and functionality of the product.
If you have any questions or concerns, please feel free to contact our customer support team for further assistance at support@batsol.co.uk or phone us at 01752 656270.
At Batteries and Solar, your satisfaction is our top priority, and we are committed to providing the best shopping experience for you.
Thank you for choosing Batteries and Solar for your purchase.
Key Features
Features:
The battery is charged, smartly... to perfect condition- The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries- Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely- The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Bluetooth Smart- The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency- With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage- The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use- The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries- LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting- When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating- Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication- Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
*Images for display purposes, Charger comes with 240V AU/NZ lead*
**Please note, this charger does not come with DC cable. 6mm2 is recommended over a short distance, as close to the batteries as possible**
Specifications
|
Blue Smart IP22 Charger
|
12V, 1output
15 / 20 /30A
|
12V, 3 outputs
15 / 20 / 30A
|
24V, 1 output
8 / 12 / 16A
|
24V, 3 outputs
16A
|
|
Input voltage range
|
180 – 265 VAC
|
180 – 265 VAC
|
|
Charge current, normal mode
|
15 / 20 / 30 A
|
8/12/16 A
|
|
Charge current, NIGHT or LOW
|
7,5 / 10 / 15 A
|
4 / 6 / 8 A
|
|
Efficiency
|
93%
|
94%
|
|
No load power consumption
|
0.5 W
|
0.5 W
|
|
Frequency
|
45 – 65 Hz
|
45 – 65 Hz
|
|
Number of outputs
|
1
|
3
|
1
|
3
|
|
Charge voltage 'absorption'
|
Normal: 14,4V High: 14,7V Li-ion: 14,2V
|
Normal: 28,8V High: 29,4V Li-ion: 28,4V
|
|
Charge voltage 'float'
|
Normal: 13,8V High: 13,8V Li-ion: 13,5V
|
Normal: 27,6V High: 27,6V Li-ion: 27,0V
|
|
Charge voltage 'storage'
|
Normal: 13,2V High: 13,2V Li-ion: 13,5V
|
Normal: 26,4V High: 26,4V Li-ion: 27,0V
|
|
Charge algorithm
|
6-stage adaptive
|
|
Can be used as power supply
|
Yes
|
|
Protection
|
Battery reversepolarity(fuse)Outputshortcircuit Overtemperature
|
|
Operating temp. range
|
-20 to +50°C
|
|
Humidity (non-condensing)
|
Max 98%
|
|
ENCLOSURE
|
|
Material & Colour
|
Aluminium (blue RAL 5012)
|
|
Battery connection
|
Screw terminals 13 mm² / AWG6
|
|
230 V AC connection
|
Cable of 1,5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
|
|
Protection category
|
IP22
|
|
Weight
|
1,3 kg
|
|
Dimensions (h x w x d)
|
235 x 108 x 65 mm
|
|
STANDARDS
|
|
Safety
|
EN 60335-1, EN 60335-2-29
|
|
Emission
|
EN 55014-1, EN 61000-6-3, EN 61000-3-2
|
|
Immunity
|
EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
|
|
Automotive
|
E4-10R
|
E4-10R
|
Attachments
Data Sheet
Manual
